AEG BSE892330M User Manual download pdf (Page 10)

Water hardness Calcium deposit

(mmol/l)

Calcium deposit

(mg/l)

Water classi-

fication

Class dH

2 7 - 14 1.3 - 2.5 50 - 100 Moderately

hard

3 14 - 21 2.5 - 3.8 100 - 150 Hard

4 over 21 over 3.8 over 150 Very hard

When the water hardness exceeds the

values in the table, fill the water drawer

with bottled water.

1. Take the 4 colour change strip

supplied with the steam set in the

oven.

2. Put all the reaction zones of the strip

into the water for approximately 1

second.

Do not put the strip into the running

water.

3. Shake the strip to remove the excess

of the water.

4. Wait 1 minute and check the water

hardness with the table below.

The colours of the reaction zones

continue to change. Do not check

the water hardness later than 1

minute after test.

5. Set the water hardness: menu: Basic

Settings.

Test strip Water hardness

1

2

3

4

You can change the water hardness in

the menu: Basic Settings / Setup / Water

hardness.

6. DAILY USE

WARNING!

Refer to Safety chapters.

6.1 Heating Functions

Turning the heating functions on and off.

1. Turn on the oven.

2. Hold the rotary knob.

The last used function is underlined.

3. Press the rotary knob to enter the

submenu and turn it to select a

heating function.

4. Press the rotary knob to confirm.

5. Set the temperature and confirm.

6. Press . Food Sensor can be

plugged at any time before or during

cooking process. Some functions

contain a sequence of pop-ups. Press

the rotary knob to go to the next

pop-up. After the last confirmation

the function starts.

To turn off a function press .

The lamp may turn off

automatically at a

temperature below 60 °C

during some oven functions.

www.aeg.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comments to this Manuals

No comments