AEG BSE892330M User Manual download pdf (Page 52)

The hard reminder obligates you to

perform the descaling.

If you do not descale the

appliance when the hard

reminder is on, you cannot

use the steam functions.

You cannot disable the

descaling reminder.

11.9 Steam generation system

- Rinsing

Remove all accessories.

Select the function from the menu:

Cleaning. The user interface will guide

you through the procedure.

The duration of the function is around 30

minutes.

The light in this function is off.

1. Put the baking tray on the first shelf

position.

2. Fill the water drawer with fresh water.

3. Press

.

Remove the baking tray after the end of

the procedure.

11.10 Removing and installing

the door

You can remove the door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

The door is heavy.

1. Open the door fully.

2. Fully lift up the clamping levers (A) on

the two door hinges.

A

A

3. Close the door until it is at an angle

of approximately 45°.

45°

4. Hold the door with one hand on each

side and pull it away from the oven at

an upwards angle.

5. Put the door with the outer side

down on a soft cloth on a stable

surface.

6. Hold the door trim (B) on the top

edge of the door at the two sides

and push inwards to release the clip

seal.

1

2

B

CAUTION!

Rough handling of the glass,

especially around the edges

of the front panel, can cause

the glass to break.

7. Pull the door trim to the front to

remove it.

8. Hold the door glass panels on their

top edge one by one and pull them

up out of the guide.

9. Clean the glass panel with water and

soap. Dry the glass panel carefully.

www.aeg.com

52

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments