AEG BPK842220M User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
11.2 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the shelf supports in the opposite
sequence.
11.3 Pyrolytic cleaning
CAUTION!
Remove all accessories and
removable shelf supports.
The pyrolytic cleaning
procedure cannot start:
if you did not remove the core
temperature sensor plug from the
socket.
if you did not fully close the oven
door.
Remove the worst dirt manually.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as the
function: Pyrolytic Cleaning.
It can cause damage to the
appliance.
1. Clean the inner side of the door with
hot water, so that the residues do not
burn from the hot air.
2. Turn the appliance on.
3. Select the Menu and press the rotary
knob to confirm.
4. Select Pyrolytic Cleaning and press
the rotary knob to confirm.
5. Select the duration of the cleaning
procedure:
Option Description
Quick 1 h for a low
degree of dirt
Normal 1 h 30 min for
a usual de-
gree of dirt
Intense 3 h for a high
degree of dirt
6. Press the rotary knob to confirm.
When the pyrolytic cleaning
starts, the appliance door is
locked and the lamp does
not work. The cooling fan
works at a higher speed.
To stop the pyrolytic
cleaning before it is
completed, turn the
appliance off.
WARNING!
After the function is
completed, the appliance is
very hot. Let it cool down.
There is a risk of burns.
After the function is
completed, the door stays
locked for the cool down
phase. Some of the
appliance functions are not
available during the cool
down phase.
11.4 Cleaning Reminder
When reminder is displayed cleaning is
necessary. Perform the function Pyrolytic
Cleaning.
ENGLISH
35
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Comments to this Manuals

No comments