Aeg KRC 4344 User Manual download pdf (Page 32)

English

Switching the Device on/off (3)

Switch the device to the standby mode with the POWER

button (the date display will appear). If this button is pressed

once more, the device switches on again.

NOTE:

After about 10 minutes, the device will automatically switch

to standby.

TUNE+/TUNE- control (11)

The TUNE control is used for different settings.

NOTE:

The TUNE control is a push switch. Turn the push switch

until a “click” can be heard. Hold it down in the respec-

tive direction of rotation until the desired setting has been

made.

Setting of the Clock (in Standby Mode)

• YoumakeadjustmentsusingtheTUNE+/TUNE-control

(11).

• AlwaysconrmyoursettingswiththeSETbutton(5).

1. Press the SET button (5). You can now adjust the settings

for the minutes, hours and the display format (24 Hr or

12 Hr) in turn.

NOTE:

“PM” will show for afternoons in the 12 hour display.

Setting the date (in standby mode)

• YoumakeadjustmentsusingtheTUNE+/TUNE-control

(11).

• AlwaysconrmyoursettingswiththeSETbutton(5).

1. Select the date display by pushing the MODE button (4).

The year display shows in the year indicator (YEAR).

2. Press the SET button (5). You can now consecutively ad-

just the settings for the date (DATE), the month (MONTH),

and the year (YEAR). The setting for the weekdays

changes automatically.

MO = Monday, TU = Tuesday, WD = Wednesday,

TH = Thursday, FR = Friday,

SA = Saturday, SU = Sunday

Changing the display indicator

With the MODE button (4), you can toggle between the date

and the time indicator or between the date and the year.

Headphone jack (13)

For headphone operation, use a headphone set with a

3.5 mm stereo jack plug plugged into the

headphone jack.

The speakers are switched off.

Volume adjusting

The desired volume can be sent using the VOLUME regula-

tor (1).

Display brightness

The backlight of the display will automatically turn off be-

tween 11 pm and 5 am.

Listening to the radio

NOTE:

The preset stations will be lost if the power is interrupted.

Scanning stations

• TuneintothedesiredstationwiththeTUNE+/TUNE-con-

trol (11). If you keep the control pressed in one direction,

thenthedevicewillsearchtothenext,orpreviousradio

station. The display will show the respective frequency.

• Ifthereisinterferenceonthereceivedstation,tryto

improve the reception by rotating, winding or unwinding

the wire antenna.

Presetting radio stations

The device can preset up to 30 radio stations. To preset a

station, follow the steps below:

1. Search for a station as described in “Scanning stations”.

2. Press the SET button (5). The display will show MEMORY

andtherespectivepresetlocationwillbegintoash.

3. Use the MEM UP (9) and MEM DN (8) buttons to choose

the preset location for the corresponding station.

4. Press the SET button again. The station will be preset.

The MEMORY indicator and the preset location will

disappear.

Recalling preset radio stations

1. Choose the preset location with the MEM UP (9) and

MEM DN (8) buttons.

Automatic station scan

WhenholdingdowntheSETbutton(5)forapprox.3seconds,

the device will start the automatic station scan searching the

entire frequency range automatically for stations. The stations

found will be stored on the preset locations 1-30 in ascending

order.

NOTE:

• Thescanwillonlystopafterall30presetlocationshave

been ﬁlled.

• Theordercannotbechangedonceset.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

Comments to this Manuals

No comments

Aeg KRC 4344 User Manual Page 32

Comments to this Manuals

Related products and manuals for Audio Aeg KRC 4344