AEG SB4 series User Manual download pdf (Page 404)

100

101

SF 8512

357

1 General

1.1 Physical Characteristics

The module is 4T wide and has rear connection and a double Europe format. It is

equipped with a C64M connector. The address area is set on the equipment side with

flexible jumpers.

1.2 Mode of Functioning

The module includes a memory field with a socket for 16 high byte and 16 low byte

elements. 2 memory elements only are activated each time for the addressing; all other

elements are then on standby and thus require only very little supply current.

The module is designed for the entire address scope of 1 mb and can be coded for any

8 blocks of 64 kb each. This is carried out with 8 flexible jumpers.

2 Operating and Indicating Elements

The front penal includes no operating and indicating elements whatsoever.

3 Configuration

The following is to be configured for the module:

Specifying the slot

Physically coding the memory addresses (cf. 3.2)

Documentation

3.1 Labelling of the EPROMs

Example for entering the program name (AEG-Seligenstadt)

Part no. with revision index; all EPROMs of a sentence have the same

part no. The number of the EPROM is on the 1st EPROM: 1 of n

A distinction is made with the slot code: “/nnX”

11 positions, for example, are available for the explanetory text (depending

on the EPROM size). Slot code: /nnX

X=L —> low-Byte

X=H —> high-Byte

AEG-042-DSWnnn

123456.nn / 1 of n <

Explanetory text / nnX

Figure 184 Labelling the EPROMs

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 430 431

Comments to this Manuals

No comments

AEG SB4 series User Manual Page 404

Comments to this Manuals

Related products and manuals for Blenders AEG SB4 series