AEG SB4 series User Manual download pdf (Page 243)

100

101

BIK 151

195

Table 52 Setting the Module address on BIK 151

16K block Address (HEX) A13

1 00000 - 03FFF 0

2 04000 - 07FFF 1

←

Addressing example:

For the BIK the second 16K block in segment 3 (address 14000 - 17FFF) should be re-

served. A jumper between A15 and A13 is necessary (see arrows in Table 51 and in

Table 52).

3.3.2 Addressing for Installation of BIK 151 in A350 / A500

When using the ALU 821 the BIK and KOS are addressed in the segments 29 and 30

of the memory area, in other cases only in the segments 3 and 4. The following table

gives the coding of the address jumpers A18 - A13.

Table 53 Coding of the Address Jumpers A13 ... A18 for Installation of the BIK 151 in A350/A500

BIK No. 16 k block Address for ALU 0x1, ALU 150 Address for ALU 821

Segment Jumper setting Segment Jumper setting

01 3 29

12 3 29

21 4 30

32 4 30

3.4 Interference Measures (EMC), Jumper M

In order to avoid interference currents via the cable screen, RS 485 connectors and

module handles are to be screwed firmly with the subrack. With ”M” a galvanic connec-

tion between the plug casing and the front panel is produced. The position of the jump-

er M is determined by the jumper position of S2 (see 3.1.2).

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 430 431

Comments to this Manuals

No comments

AEG SB4 series User Manual Page 243

Comments to this Manuals

Related products and manuals for Blenders AEG SB4 series