AEG AXP26V578HW User Manual download pdf (Page 16)

16

www.aeg.com

Fig. 23

Fig. 24

Connect a 8-9mm hose here

to extend the draining hose

During the Heat and dry mode, you need

to connect the drain hose to the drain

outlet in the back of the unit to drain the

condensate from the unit. Otherwise,

the unit may not function normally and

display show “P1”.

A. Discharge into a drain that is lower

than the unit.

B. The unit have a pump to drain the

condensate.

During cooling mode, please replace the

rubber stopper to the hose connector to

reach the maximum performance.

If necessary you can extend the drain

hose by adapting the drain hose adpator

in the end of the drain hose, then use

a 8-9mm hose to extend.(Fig. 24)

Now that you have mastered the

operating procedure, here are more

features in your control that you should

become familiar with.

7.3 Drainage 7.4 Operation Tips

•

The “Cool” circuit has an automatic

3 minutes time delayed start if the

unit is turned o and on quickly.

This prevents overheating of the

compressor and possible circuit

breaker tripping. The fan will continue

to run during this time.

•

Temperature can be set between

16°C and 32°C.

•

The control is capable of displaying

temperature in degrees Fahrenheit or

degrees Celsius. To convert from one

to the other and back, press and hold

the “TEMP” Up ( + ) and Down ( - )

buttons together for 3 seconds.

•

There is a 2-Second delay for the

compressor shutting down when

selecting Fan. This is to cover the

possibility of having to roll through

to select another mode.

•

After a power outage, the unit will

memorize the last setting and return

the unit to the same setting once

power is restored.

•

Indoor operating temperature range

for this product is 16°C to 35°C.

•

During normal operation, the unit's

display will show room temperature

but when the room temperature is

over 37°C the display will show “HI”.

•

After 60 seconds of control inactivity

the display and indicator lights will

turn o. Press any button on the

control panel or remote control

and the display will resume.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 95 96

Comments to this Manuals

No comments