AEG AXP26V578HW User Manual download pdf (Page 18)

18

www.aeg.com

•

Dirty air lter - air restricted. Clean air

lter.

•

Outside temperature extremely hot.

Set FAN speed to a faster setting to

bring air through cooling coils more

frequently.

Room too cold.

•

Set temperature too low. Increase set

temperature.

10.

ADDITIONAL INFORMATION

Transport of equipment containing

ammable refrigerants

Disposal of equipment using

ammable refrigerants

Marking of equipment using signs

Storage of equipment/appliances

Storage of packed (unsold) equipment

Information on servicing

See transport regulations

See national regulations.

See local regulations

The storage of equipment should be

in accordance with the manufacturer’s

instructions.

Storage package protection should be

constructed such that mechanical damage

to the equipment inside the package will

not cause a leak of the refrigerant charge.

The maximum number of pieces of

equipment permitted to be stored together

will be determined by local regulations.

1.

Checks to the area. Prior to beginning

work on systems containing ammable

refrigerants, safety checks are

necessary to ensure that the risk of

ignition is minimised. For repair to

the refrigerating system, the following

precautions shall be complied with

prior to conducting work on the

system.

2.

Work procedure. Work shall be

undertaken under a controlled

procedure so as to minimise the

risk of a ammable gas or vapour

being present while the work is being

performed.

3.

General work area. All maintenance

sta and others working in the local

area shall be instructed on the nature

of work being carried out. Work in

conned spaces shall be avoided.

The area around the workspace shall

be sectioned o. Ensure that the

conditions within the area have been

made safe by control of ammable

material.

4.

Checking for presence of refrigerant.

The area shall be checked with an

appropriate refrigerant detector prior

to and during work, to ensure the

technician is aware of potentially

ammable atmospheres. Ensure that

the leak detection equipment being

used is suitable for use with ammable

refrigerants, i.e. nonsparking,

adequately sealed or intrinsically safe.

mode. Then, set temperature to a higher

setting.

•

Exhaust duct not connected or blocked.

See 5.1 Exhausting hot air Section.

Air conditioner cooling, but room is

too warm - ice forming on cooling coil

behind decorative front

Air conditioner turns on and o rapidly.

•

Dirty air lter - air restricted. Clean air

lter. Refer to 8. Care and Cleaning

section.

•

Temperature is set too high. Set

temperature to a lower setting.

•

Air directional louvers positioned

improperly. Position louvers for

better air distribution.

•

Front of unit is blocked by drapes,

blinds, furniture, etc. - restricts air

distribution. Clear blockage in front

of unit.

•

Doors, windows, registers, etc.

open - cool air escapes. Close doors,

windows, registers, etc.

•

Unit recently turned on in hot room.

Allow additional time to remove

“stored heat” from walls, ceiling,

oor and furniture.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Comments to this Manuals

No comments