AEG BC3000001M User Manual download pdf (Page 22)

9.2 Shelf supports

Removing the shelf supports

You can remove the shelf supports to

clean the side walls.

1.

Pull the front of the shelf support

away from the side wall.

1

2

2.

Pull the rear end of the shelf sup-

port away from the side wall and re-

move it.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

Valid for telescopic runners:

The retaining pins on the tele-

scopic runners must point to the

front.

9.3 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass

cover can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with a suitable 570

°F heat-resistant lamp.

4.

Install the glass cover.

22

www.aeg.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments