AEG BD740SV User Manual download pdf (Page 56)

• To clean the bottom side in case of

limestone residual, use some drops of

vinegar.

• Clean the appliance interior after

each use. Fat accumulation or other

food remains may result in a fire. The

risk is higher for the grill pan.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

• Dry the oven when the cavity is wet

after usage.

12.2 Recommended cleaning

products

Do not use abrasive sponges or

aggressive detergents. It can cause

damage to the enamel and the stainless

steel parts.

You can buy our products at

www.aeg.com/shop and at the best

retailer shops.

12.3 Removing the shelf

supports

Before maintenance, make sure that the

appliance is cool. There is a risk of burns.

To clean the appliance, remove the shelf

supports.

1. Pull carefully the supports up and out

of the front catch.

2

3

1

2. Pull the front end of the shelf support

away from the side wall.

3. Pull the supports out of the rear

catch.

Install the shelf supports in the opposite

sequence.

12.4

Steam Cleaning

Remove as much dirt as possible

manually.

Remove the accessories and the shelf

support to clean the side walls.

The steam cleaning functions support

the steam cavity cleaning of the

appliance.

For a better performance

you should start the cleaning

function when the appliance

is cool.

The specified time is related

to the duration of the

function and does not

include the time required for

cleaning of the cavity by the

user.

When the steam cleaning function is

active, the light is off.

1. Fill the water drawer to the maximum

level.

2. Choose the steam cleaning function

in the menu: Cleaning.

Steam Cleaning - the duration of the

function is around 30 minutes.

a) Activate the function.

b) An acoustic signal sounds when

the programme is completed.

c) Touch a sensor field to

deactivate the signal.

Steam Cleaning Plus - the duration

of the function is around 75 minutes.

a) Spray a suitable detergent

uniformly in the oven cavity on

both enamel and steel parts.

Before you start the cleaning

procedure, make sure that the

appliance is cold.

b) Activate the function.

After around 50 minutes an

acoustic signal sounds when the

first part of the programme is

completed.

c) Press

.

www.aeg.com

56

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Comments to this Manuals

No comments