AEG BP7314001M User Manual download pdf (Page 4)

• Before maintenance cut the power supply.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can

scratch the surface, which may result in shattering of

the glass.

• Excess spillage must be removed before the pyrolytic

cleaning. Remove all parts from the oven.

• Only use the core temperature sensor recommended

for this appliance.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

• If the supply cord is damaged, it must be replaced by

a special cord or assembly available from the manu-

facturer or an authorized Service.

• Ensure that the appliance is switched off before re-

placing the lamp to avoid the possibility of electric

shock.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must in-

stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the han-

dle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is instal-

led below and adjacent safe struc-

tures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply. If not, contact an

electrician.

www.aeg.com

1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments

AEG BP7314001M User Manual Page 4

Comments to this Manuals

Related products and manuals for Ovens AEG BP7314001M