AEG BP7314001M User Manual download pdf (Page 39)

13. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

Problem Possible cause Remedy

The appliance does not

heat up.

The appliance is deacti-

vated.

Activate the appliance.

The appliance does not

heat up.

The time of day is not

set.

Set the clock. Refer to

"Setting and changing

the time”.

The appliance does not

heat up.

The necessary settings

are not set.

Make sure that the set-

tings are correct.

The appliance does not

heat up.

The automatic switch-off

is activated.

Refer to „Automatic

switch-off“.

The appliance does not

heat up.

The fuse is released. Make sure that the fuse

is the cause of the mal-

function. If the fuse re-

leases again and again,

contact a qualified elec-

trician.

The lamp does not oper-

ate.

The lamp is defective. Replace the lamp.

The display shows C2. You want to start the py-

rolytic cleaning, keep

warm or defrost function

but you did not remove

core temperature sensor

plug from the socket.

Remove the core tem-

perature sensor plug

from the socket.

The display shows C3. You want to start the py-

rolytic cleaning but you

did not fully close the

door.

Fully close the door.

The display shows F102. The door lock is defec-

tive.

• Fully close the door.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

F102 again, contact

the Customer Care

Department.

ENGLISH 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments