AEG BP7314001M User Manual download pdf (Page 37)

1

2

2.

Pull the rear end of the shelf sup-

port away from the side wall and re-

move it.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

Valid for telescopic runners:

The retaining pins on the tele-

scopic runners must point to the

front.

12.3 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass

cover can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

Replacing the lamp on the left side of

the cavity.

1.

Remove the left shelf support.

2.

Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cov-

er. Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

5.

Install the left shelf support.

ENGLISH 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments