AEG A92700GNW0 User Manual download pdf (Page 42)

• Remove the door.

• Unscrew and move the pin to the oppo-

site side.

• Re-insert the door.

• Re-screw the lower hinge.

• Raise the appliance and install the ven-

tilation grille.

180°

• Unscrew the handle. On the opposite

side remove the hole covers by driving

a 3-4 mm drift or drill into them.

• Install the handle. Fit the handle on to

the opposite side by turning it on half

circle.

• Install the hole covers provided within

the accessory bag.

• Put the cabinet in position.

WARNING!

Reposition, level the appliance,

wait for at least four hours and

then connect it to the power sock-

et.

Do a final check to make sure that:

• All screws are tightened.

• The edges of the doors run parallel to

the side edge of the appliance.

• The magnetic seal adheres to the cabi-

net.

• The door opens and closes correctly.

WARNING!

If the ambient temperature is cold

(i.e. in Winter), the gasket may not

fit perfectly to the cabinet. In that

case, wait for the natural fitting of

the gasket.

www.aeg.com

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

No comments

AEG A92700GNW0 User Manual Page 42