AEG BEK455220M User Manual download pdf (Page 26)

10.3 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

CAUTION!

Be careful when you remove

the shelf supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

Install the removed accessories in the

opposite sequence.

10.4 Aqua Cleaning

This cleaning procedure uses humidity to

help remove remaining fat and food

particles from the oven.

1. Put 200 ml of water into the cavity

embossment at the bottom of the

oven.

2. Set the function: and press .

3. Set the temperature to 90 °C.

4. Let the oven operate for 30 minutes.

5. Turn off the oven and let it cool

down.

6. When the oven is cool, clean it with a

soft cloth.

WARNING!

Make sure that the oven

is cool before you touch

it. There is a risk of

burns.

10.5 Oven ceiling

WARNING!

Deactivate the appliance

before you remove the

heating element. Make sure

that the appliance is cold.

There is a risk of burns.

Remove the shelf supports.

You can fold down the heating element

on the oven ceiling to clean the oven

ceiling easily.

1. Hold the heating element with two

hands at the front.

2. Pull it forwards against the spring

pressure and out of two holders.

The heating element folds down.

3. Clean the oven ceiling.

4. Install the heating element in the

opposite sequence.

Install the heating element

correctly above the supports

on the inner walls of the

appliance.

5. Install the shelf supports.

10.6 Removing and installing

the door

You can remove the door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

The door is heavy.

1. Open the door fully.

2. Fully press the clamping levers (A) on

the two door hinges.

www.aeg.com

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments