AEG 7200 Instruction Manual download pdf (Page 21)

Preparing for playback

Input the distance to the speakers.

This setting allows the signals output from different speakers to reach

the listening position simultaneously.

÷ In steps 7, indications appear only for the selected channels of the

speakers that require adjusting.

Measure the distance from the listening position to each

of the speakers.

Jot down the distance to each of the speakers.

Distance to Front speaker (L) : ____ feet (meters)

Distance to Center speaker (C) : ____ feet (meters)

Distance to Front speaker (R) : ____ feet (meters)

Distance to Surround speaker (RS) : ____ feet (meters)

Distance to Surround back speaker (RB) : ____ feet (meters)

Distance to Surround back speaker (LB) : ____ feet (meters)

Distance to Surround speaker (LS) : ____ feet (meters)

Distance to Subwoofer (SW) : ____ feet (meters)

1 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select "DISTANCE" on setup displays, and press the

ENTER.

2 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select the unit and press the ENTER.

1 "METERS"

2 "FEET"

3 "EXIT": Press the ENTER again to return to the main

setup displays.

3 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select the speakers and the MULTI CONTROL % / ﬁ

(or the % / ﬁ keys) to adjust the distance to the front

speakers.

The speaker indicator to be adjusted blinks.

÷ The speakers you have selected should appear on the display.

Confirm that all the speakers have been correctly selected.

÷ The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),

adjustable in 1 foot (0.3 m) increments.

4 Repeat steps 3 to input the distance for each of the

speakers.

5 Press the ENTER again to return to the main setup

displays.

Indication in meters

Adjust the LFE LEVEL (Low Frequency Effects level).

Adjust the level of the low-frequency fields effect (LFE) signal, which is

the signal used exclusively for giving the field effect of bass tone, in the

Dolby Digital or DTS signal.

1 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select "LFE LEVEL" on setup displays, and press the

ENTER.

2 Use the MULTI CONTROL % / ﬁ (or the % / ﬁ keys) to

adjust the LFE LEVEL.

÷ The LFE LEVEL is adjusted from 0dB to -10dB in 1dB

step decrements.

3 Press the ENTER again to return to the main setup

displays.

Set up the GAME jacks on the front panel.

Perform the setup for convenience of playing a video game using the

receiver.

1 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select "GAME FUNC" on setup displays, and press the

ENTER.

2 Press the MULTI CONTROL % / ﬁ (or the % / ﬁ keys)

to select the game mode.

MODE 1

When the connected game machine is turned ON, the input

selector is switched automatically to "GAME". In addition,

the ACTIVE EQ function is switched to "EQ GAME" and the

listen mode is switched to the appropriate mode for games.

MODE 2

When the connected game machine is turned ON, the input

selector is switched automatically to "GAME".

OFF

The game mode is switched OFF.

÷ The game mode is not activated if no video signal is input to

the VIDEO jack in the GAME jack section.

÷ The game mode is not activated when the DUAL SOURCE

function is switched ON. ¢

3 Press the ENTER again to return to the main setup

displays.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Comments to this Manuals

No comments

AEG 7200 Instruction Manual Page 21

Comments to this Manuals