AEG 7200 Instruction Manual download pdf (Page 36)

ENTER

INPUT SELECTOR

RCV MODE

DIMMER °

SLEEP °

SOUND

LISTEN MODE %

ﬁ

#, ENTER

MULTI CONTROL %

ﬁ

1 Press the RCV MODE key on the remote control unit to

set it to the receiver control mode.

2 Press the SOUND key.

Press the MULTI CONTROL @ / # (or the @ / # keys) to select

the setting item and press the ENTER.

Note that some items are not displayed in certain modes.

1 "SP LEVEL": *1

Adjusting the volume level of each channel

2 "INPUT": (Analog mode only) ™

Input level adjustment

3 "TONE": *2 ¢

Tone level adjustment

4 "EFFECT": (DSP mode only)

DSP effect level adjustment

5 "DUAL MONO": *3 ‡

Selection between Stereo, Main audio, Sub audio and

Main + Sub audio

6 "MIDNIGHT": *4 °

Midnight mode adjustment

7 "PANORAMA": *5 ‡

Panorama mode ON/OFF

8 "DIMENSION": *5 ‡

Dimension adjustment

9 "C WIDTH": *5 ‡

Center width adjustment

0 "C

IMAGE

": *6 °

Center image mode adjustment

*1 The setting in the SOUND mode is temporary. It returns automati-

cally to the original level set in "Speaker settings" when the

receiver is turned OFF/ON. *

*2 PCM stereo and analog stereo mode only.

*3 DOLBY DIGITAL mode only

*4 DOLBY DIGITAL, DTS mode only

*5 Only when the input signal is a 2-channel signal in the DOLBY PRO

LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.

*6 Only when the input signal is a 2-channel signal in the DTS

NEO:6 MUSIC mode.

4 Use the MULTI CONTROL % / ﬁ (or the % / ﬁ keys) to

adjust the setting as desired.

÷ The adjustment item is displayed for approximately 20 seconds.

5 Press the SOUND key again to return to the input indication.

You can make further adjustments to the sound while listening to

playback in the surround mode.

÷ The mode using the SOUND key is defeated when the REC MODE is

ON. §

Adjusting the sound

Adjusting the volume level of each channel

The volume levels of the center speaker, subwoofer, surround speaker

and surround back speaker channels can be adjusted during playback.

1 Press the RCV MODE key on the remote control unit to

set it to the receiver control mode.

2 Press the SOUND key.

3 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select "SP LEVEL" on setup displays, and press the

ENTER.

4 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select the speaker.

1 Subwoofer level adjustment ("SW" indicator blinks)

2 Center speaker level adjustment ("C" indicator blinks)

3 Surround speaker level adjustment ("LS", "RS" indicator

blinks)

4 Surround back speaker level adjustment ("LB", "RB" or

"BS" indicator blinks)

5 Use the MULTI CONTROL % / ﬁ (or the % / ﬁ keys) to

adjust the speaker volume level.

÷ The level of each speaker channel can be adjusted in 1 dB

steps between -10 dB and +10 dB.

6 Repeat steps 4 and 5 as required.

7 Press the SOUND key again to return to the input

indication.

÷ The setting in the SOUND mode is temporary. It returns automati-

cally to the original level set in "Speaker settings" when the

receiver is turned OFF/ON. *

Adjusting the DSP effect level

(DSP mode only)

The DSP effect level can be adjusted when the listen mode is a DSP surround

mode "ARENA", "JAZZ CLUB", "THEATER", "STADIUM" or "DISCO".

1 Press the RCV MODE key on the remote control unit to

set it to the receiver control mode.

2 Press the SOUND key.

3 Use the MULTI CONTROL @ / # (or the @ / # keys) to

select "EFFECT" on setup displays, and press the ENTER.

4 Use the MULTI CONTROL % / ﬁ (or the % / ﬁ keys) to

adjust the

EFFECT

LEVEL.

The DSP effect level can be adjusted in the range between 1 and 5.

5 Press the SOUND key again to return to the input indication.

Convenient functions

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Comments to this Manuals

No comments

AEG 7200 Instruction Manual Page 36

Comments to this Manuals