AEG 7200 Instruction Manual download pdf (Page 18)

Preparing for playback

SETUP

ON/STANDBY

RECEIVER

MULTI CONTROL

%/ﬁ /@ /#

%/ﬁ /@ /# , ENTER

RCV MODE

SOUND ™

ENTER,

SETUP

Speaker settings

To enable you to obtain optimum enjoyment from the receiver’s listening

modes, make sure to complete the speaker settings (subwoofer, front,

center, surround and surround back speakers) as described below.

Turn on the power to this receiver by pressing the ON/

STANDBY

key (or the RECEIVER ).

If you want to use the remote control unit, press the RCV MODE

key on the remote to set it to the receiver control mode.

Initiate the setup mode.

1 Press the SETUP key.

2 Use the MULTI CONTROL @ / # (or the @ / # keys) for

the following displays.

1 "SP SETUP"

2 "SP LEVEL"

3 "DISTANCE"

4 "ASSIGN."

5 "LFE LEVEL"

6 "GAME FUNC"

7 "EXIT"

÷ While the main setup screen is displayed, the setup mode

can be canceled by pressing the SETUP key or selecting

"EXIT" and then pressing the ENTER.

Select the setup method.

1 Select "SP SETUP" and press the ENTER to select the

speaker setup method.

2 Use the MULTI CONTROL @ / # (or the @ / # keys) for

the following displays.

1 "HTB1 6.1CH": Select "HTB1 6.1CH" if you use speaker

system KS-4200EX*.

2 "HTB1 5.1CH": Select "HTB1 5.1CH" if you use speaker

system KS-2200HT*.

3 "HTB2 6.1CH": Select "HTB2 6.1CH" if you use speaker system

KS-3200HT*+KS-3200EX*, KS-5200EX* or

KS-7200HT*+KS-3200EX*.

4 "HTB2 5.1CH": Select "HTB2 5.1CH" if you use speaker

system KS-3200HT*, KS-5200HT* or KS-7200HT*.

5 "HTB3 6.1CH": Select "HTB3 6.1CH" if you use speaker

system KS-8200EX*.

6 "HTB3 5.1CH": Select "HTB3 5.1CH" if you use speaker

system KS-8200HT*.

7 "CUSTOM": Select to set up the speakers according to

the speaker system in use. (Speaker setup is required

every time after the speaker system is changed.)

8 "EXIT": Press the ENTER again to return to the main

setup displays.

* Model availability may differ depending on the country

and sales area.

÷ When the 5.1 channel speaker system configuration is used

or the speaker setting is set to "BS OFF", the DOLBY PRO

LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes

cannot be selected.

If you selected "HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH",

"HTB2 5.1CH", "HTB3 6.1CH" or "HTB3 5.1CH" in the above:

Press the ENTER, then press the MULTI CONTROL % / ﬁ (or

the % / ﬁ keys) to select "OK", and press the ENTER again to

establish the setup.

÷ Select "CANCEL" to return to the status before setup.

÷ When you use a KENWOOD speaker system and select

"HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH", "HTB2 5.1CH",

"HTB3 6.1CH" or "HTB3 5.1CH" set the speaker setup, the

audio will be corrected automatically according to the

speaker characteristics.

If you selected "CUSTOM" in the above:

Press the ENTER to proceed to detailed setups.

The flow of the SETUP is as follows;

SP SETUP SP LEVEL DISTANCE ASSIGN.

EXIT

LEF LEVEL

GAME FUNC

Front Left

Center

Front Right

Front Left

Right Surround

Surround Back

(Right/Left

Surround Back)

Subwoofer

HTB 1 6.1CH

HTB 1 5.1CH

HTB 2 6.1CH

HTB 2 5.1CH

HTB 3 6.1CH

HTB 3 5.1CH

CUSTOM

EXIT

Subwoofer

Front

Center

Surround

Back

MANUAL/OFF

AUTO

(RB/LB)

Digital

EXIT

D4 Video

METERS

EXIT

FEET

MODE 1

MODE 2

OFF

BS/SW

amp

Subwoofer

Re-mix

EXIT

÷ The subwoofer setting indication "SUBW" appears.

Continued to next page

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Comments to this Manuals

No comments

AEG 7200 Instruction Manual Page 18

Comments to this Manuals