Aeg LAVAMAT 88730 User Manual download pdf (Page 44)

Installation and connection instructions

Installation-Site preparation

• The installation surface must be clean, dry and level. Do not install on

a deep pile carpet.

• Minor unevenness of the floor surface should never be levelled out by

laying pieces of wood, card or similar materials, but should always be

compensated for by adjusting the screw feet.

• If the appliance is installed next to a heat source (e.g. cooking appli-

ance), a heat insulating pad (87 x 57 cm) must be placed between the

appliance and the heat source.

• Do not install the appliance in locations where the temperature may

fall below freezing.

• Please ensure that when the appliance is installed it is easily accessi-

ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To

help prevent vibration we recommend you place a waterproof wood

panel, at least 15 mm thick under the appliance, secured to at least

2 floor beams with screws. If possible install the appliance in one of the

corners of the room, where the floor is more stable.

1 ... 43 44 45 ... 56

No comments

Aeg LAVAMAT 88730 User Manual Page 44