AEG UN 6.03 Technical Information download pdf (Page 30)

Practical A.E.G Upgrade 2006

• Drill a hole in the screw, then scoop out the old screw.

On the other hand, to prevent certain critical screws from getting loose, apply

threadlock/locktite - a glue type of compound that makes screws more secure.

Loctite usually won't bite into plastic very well. It can sometimes soften the

plastic, but most of the time it won't really be permanently stuck on there. Most

of the time you can get a locked screw loose via the use of a decent screwdriver

(by the way, heat is what is used to release excessively strong locktite).

Anywhere screws thread into metal, apply a dab of locktite for preventing all the

vibration from loosening the screws.

There are locktites of different strength available. You may want to check out the

proper type to use through this URL:

http://www.loctiteproducts.com/glue.asp

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 156 157

No comments

AEG UN 6.03 Technical Information Page 30