USER MANUALEN User ManualDishwasherFSK93800P
Settings Values DescriptionKey tones OffClickBeepSet the sound of the keyswhen pressed.Volume From level 1 to level10.Adjustment of the sound vol-ume.
6.4 Starting the MyFavouriteprogramme1. Press and hold OK for about 3seconds until the display shows theMyFavourite setting.2. Close the appliance doo
Not all options arecompatible with each other.If you have selected noncompatible options, theappliance will automaticallydeactivate one or more ofthem
Every time ECO 50° is activated, XtraDryoption is off and needs to be chosenmanually. In other programmes, thesetting of XtraDry is permanent and it i
German de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el37 - 42 65 - 75 6.5 - 7.5 46 - 52 829 - 36 51 - 64 5.1 - 6.4 36 - 4
CAUTION!Water and salt can come outof the salt container whenyou fill it. After you fill thesalt container, immediatelystart a programme toprevent cor
9.1 Comfort LiftCAUTION!Do not sit on the rack. Donot put excessive pressureon the locked basket.CAUTION!Do not exceed the max loadcapacity of 18 kg.C
9.3 Setting and starting aprogrammeThe Auto Off functionThis function decreases energyconsumption by deactivatingautomatically the appliance when it i
Cancelling a runningprogrammeWhen you cancel the runningprogramme the options are set to theirdefault values.1. Open the appliance door.2. Press and h
2. Make sure that the salt and rinse aidcontainers are full.3. Start the shortest programme with arinsing phase. Do not add detergentand do not load t
CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...
1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.5.
3. Wash the spray arm under runningwater. Use a thin pointed tool, e.g.toothpick, to remove particles of soilfrom the holes.4. To engage again the spr
WARNING!Repairs not properly donemay result in serious risk tothe safety of the user. Anyrepairs must be performedby qualified personnel.With some pro
Problem and alarm code Possible cause and solutionThe options of the programhave to be set again everytime.• To save your favourite configuration use
Problem Possible cause and solutionThere are whitish streaks orbluish layers on glasses anddishes.• The release quantity of rinse aid is too much. Adj
Problem Possible cause and solutionDull, discoloured or chippedtableware.• Make sure that only dishwasher-safe items are washedin the appliance.• Load
www.aeg.com26
ENGLISH 27
www.aeg.com/shop117883331-A-512016
manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa
• Do not leave the appliance with the open doorunattended to avoid stepping accidentally onto it.• Before any maintenance operation, deactivate theapp
WARNING!Dangerous voltage.• If the water inlet hose is damaged,immediately close the water tap anddisconnect the mains plug from themains socket. Cont
3. PRODUCT DESCRIPTION549 6713 12111014 2318 1Top spray arm2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dis
When AutoOpen is activatedduring the drying phase, theprojection on the floor maynot be completely visible. Tocheck the remaining time ofthe running p
Programme Degree of soilType of loadProgramme phases OptionsAutoSense 45°-70° 2)• All• Crockery, cutlery,pots and pans• Prewash• Wash from 45 °Cto 70
5.1 Consumption valuesProgramme 1)Water(l)Energy(kWh)Duration(min)ECO 50° 11 0.832 232AutoSense 45°- 70° 7 - 14 0.6 - 1.6 40 - 170ProZone 50°- 65° 14
Comments to this Manuals