AEG F78400VI0P User Manual

FAVORIT 78400 VI0P EN User manual

6.2 Filling the salt container1.Turn the cap counterclockwise andopen the salt container.2.Put 1 litre of water in the salt con-tainer (only for the f

5. Set and start the correct programmefor the type of load and the degreeof soil.7.1 Using the detergent2030MAX1234+-ABC1.Press the release button (B)

1. Press RESET until the display shows 2horizontal status bars.Cancelling the programme1. Press RESET until the display shows 2horizontal status bars.

• Make sure that cutlery and dishes donot bond together. Mix spoons withother cutlery.• Make sure that glasses do not touchother glasses.• Put the sma

6.Make sure that the filter (B) is cor-rectly positioned under the 2 guides(C).7.Assemble the filter (A) and put itback in filter (B). Turn it clockwi

Problem Possible solution Make sure that the pressure of the watersupply is not too low. For this information,contact your local water authority. Ma

7. Fill the rinse aid dispenser.11. TECHNICAL INFORMATIONDimensions Width / Height / Depth(mm)446 / 818 - 898 / 550Electrical connection Refer to the

ENGLISH 17

18www.aeg.com

ENGLISH 19

CONTENTS1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. PRODUC

www.aeg.com/shop117929051-A-212013

1. SAFETY INSTRUCTIONSBefore the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsi

WARNING!Dangerous voltage.• If the water inlet hose is damaged, im-mediately disconnect the mains plugfrom the mains socket. Contact theService to rep

2. PRODUCT DESCRIPTION11123479 568 101Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Detergent dispe

Indicators DescriptionSalt indicator. This indicator is off while the programme oper-ates.Rinse aid indicator. This indicator is off while the program

2) This programme has a high temperature rinsing phase for better hygiene results. Duringthe rinsing phase, the temperature stays at 70 °C for at leas

5. OPTIONS5.1 Multitab optionActivate this option only when you usethe combi detergent tablets.This option deactivates the flow of rinseaid and salt.

3. Fill the rinse aid dispenser.4. Open the water tap.5. Processing residues can stay in theappliance. Start a programme to re-move them. Do not use d