AEG F99705VI1P User Manual

EN User ManualDishwasherFAVORIT 99705VI1P

Settings Values DescriptionKey tones OffClickBeepSet the sound of the keyswhen pressed.Volume From level 1 to level 10. Adjustment of the soundvolume.

6.4 How to save theMyFavourite programmeYou can only save 1 programme at atime. A new setting cancels the previousone.1. Press the Option key.2. Selec

Options Values DescriptionXtraDry ONOFF (default value)Activate this option if youwant to boost the dryingperformance. Refer to spe-cific information

If the TimeSaver option is applicable tothe selected programme, the displayshows the 2 conditions Fast and Normaland the programme duration for eachco

German de-grees (°dH)French degrees(°fH)mmol/l Clarke de-greesWater softener lev-el<4 <7 <0.7 < 51 2)1) Factory setting.2) Do not use salt

How to fill the rinse aiddispenserABCCAUTION!Only use rinse aidspecifically designed fordishwashers.1.Open the lid (C).2. Fill the dispenser (B) until

CAUTION!Only use detergentspecifically designed fordishwashers.1. Press the release button (A) to openthe lid (C).2. Put the detergent, in powder orta

Cancelling the delay start whilethe countdown operatesWhen you cancel the delay start theprogramme and the options are set totheir default values.1. O

The water softener level can also beset to the lowest value when usingmulti-tablets and the water hardnesslevel is lower than 21dH.• Detergent tablets

11.1 Cleaning the filtersThe filter system is made of 3 parts.CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

11.2 Cleaning the upper sprayarmWe recommend to clean regularly theupper spray arm to avoid soil to clog theholes.Clogged holes can cause unsatisfacto

With some problems, the displayshows a message.The majority of problems that canoccur can be solved without the needto contact an Authorised ServiceCe

Problem Possible cause and solutionThe options of the programmehave to be set again every time.• To save your favourite configuration use option My-Fa

Problem Possible cause and solutionThere are whitish streaks orbluish layers on glasses anddishes.• The release quantity of rinse aid is too much. Adj

Refer to "Before first use", "Daily use" or "Hints andtips" for other possiblecauses.13. TECHNICAL INFORMATIONDimensions

ENGLISH 25

www.aeg.com26

ENGLISH 27

www.aeg.com/shop117904272-A-162015

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

• Put knives and cutlery with sharp points in the cutlerybasket with the points down or in a horizontalposition.• Do not keep the appliance door open

WARNING!Dangerous voltage.• If the water inlet hose is damaged,immediately disconnect the mainsplug from the mains socket. Contactthe Authorised Servi

3. PRODUCT DESCRIPTION5410 9 6711 12 2318 1Top spray arm2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dispen

4. CONTROL PANEL1 2 3 46 51On/off button2Navigation key (up)3Display4Option key5OK key6Navigation key (down)4.1 Key behaviourNavigation keys (up and d

Programme Degree of soilType of loadProgramme phases OptionsProZone 50°-65° 3)• Mixed soil• Crockery, cut-lery, pots andpans• Prewash• Wash 50 °C and6

5.1 Consumption valuesProgramme 1)Water(l)Energy(kWh)Duration(min)ECO 50° 11 0.857 225AutoSense 45°-70° 7 - 14 0.6 - 1.6 40 - 160ProZone 50°-65° 14 -