AEG F988709M0P User Manual

EN User ManualDishwasherF988709M0P

a detrimental effect on the washingresults and on the appliance.The higher the content of these minerals,the harder your water is. Water hardnessis me

will deactivate the rinse aid dispenserand no rinse aid will be released.Factory setting: level 4.How to set the rinse aid levelThe appliance must be

7.1 XtraDryActivate this option when you want toboost the drying performance. With useof this option, the duration of someprogrammes, water consumptio

8.1 The salt containerCAUTION!Only use salt specificallydesigned for dishwashers.The salt is used to recharge the resin inthe water softener and to as

• If the salt indicator is on, fill thesalt container.• If the rinse aid indicator is on, fillthe rinse aid dispenser.3. Load the baskets.4. Add the d

Cancelling the delay start whilethe countdown operatesWhen you cancel the delay start youhave to set the programme and optionsagain.Press and hold sim

1. Set the highest level of the watersoftener.2. Make sure that the salt and rinse aidcontainers are full.3. Start the shortest programme with arinsin

CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.

11.2 Cleaning the upper sprayarmWe recommend to clean regularly theupper spray arm to avoid soil to clog theholes.Clogged holes can cause unsatisfacto

With some problems, the displayshows an alarm code.The majority of problems that canoccur can be solved without the needto contact an Authorised Servi

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

Problem and alarm code Possible cause and solutionSmall leak from the appli-ance door.• The appliance is not levelled. Loosen or tighten the ad-justab

Problem Possible cause and solutionThere are stains and dry waterdrops on glasses and dishes.• The released quantity of rinse aid is not sufficient. A

Problem Possible cause and solutionDull, discoloured or chippedtableware.• Make sure that only dishwasher-safe items are washedin the appliance.• Load

ENGLISH 23

www.aeg.com/shop117884820-A-402016

manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation orusage. Always keep the instructions in a sa

• Do not leave the appliance with the open doorunattended to avoid stepping accidentally onto it.• Before any maintenance operation, deactivate theapp

WARNING!Dangerous voltage.• If the water inlet hose is damaged,immediately close the water tap anddisconnect the mains plug from themains socket. Cont

3. PRODUCT DESCRIPTION65911 10 7812 13 34211Worktop2Top spray arm3Upper spray arm4Lower spray arm5Filters6Rating plate7Salt container8Air vent9Rinse a

4. CONTROL PANEL12 4 568371On/off button2Program button3Programme indicators4Display5Delay button6Option button7Indicators8Start button4.1 IndicatorsI

5. PROGRAMMESProgramme Degree of soilType of loadProgramme phases Options 1)• Normal soil• Crockery and cut-lery• Prewash• Wash 50 °C• Rinses• Dry• Ex

5.1 Consumption valuesProgramme 1)Water(l)Energy(kWh)Duration(min)11 0.961 2257 - 14 0.6 - 1.6 40 - 16014 - 16 1.2 - 1.5 139 - 15512.5-14.5 1.4-1.8 16