AEG 47132MM-MN User Manual download pdf (Page 23)

11.4 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

The retaining pins on the

telescopic runners must

point to the front.

Install the shelf supports in the opposite

sequence.

CAUTION!

Make sure that the longer

fixing wire is in the front. The

ends of the two wires must

point to the rear. Incorrect

installation can cause

damage to the enamel.

11.5 Removing and cleaning

the door glasses - top oven

The door glass in your

product can be different in

type and shape from the

examples you see in the

image. The number of

glasses can also be different.

1. Open the door.

2. Hold the door trim on the top edge

of the door at the two sides and push

inwards to release the clip seal.

1

2

1

3. Pull the door trim to the front to

remove it.

4. Remove the glass panels.

To install the panels, do the same steps

in reverse.

11.6 Removing and cleaning

the door glasses - main oven

The door glass in your

product can be different in

type and shape from the

example you see in the

image. The number of

glasses can also be different.

1. Push the door trim at one side to

remove it.

ENGLISH

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comments to this Manuals

No comments