AEG 47132MM-MN User Manual download pdf (Page 11)

Make sure that the hole in the crown

is above the ignition candle.

Make sure that the location pegs are

in the slots in the burner body.

Make sure that you can move the

crown a small distance from side to

side.

2. Put the burner cap centrally on top of

the crown (enamel side up).

Make sure that the cap is correctly

installed and you can move the cap

from side to side and front to back.

3. Try to light the burner.

If the burner does not ignite, adjust the

crown and cap again.

5.4 Turning the burner off

To put the flame out, turn the knob to

the off position .

WARNING!

Always turn the flame down

or switch it off before you

remove the pans from the

burner.

5.5 Lid Safety Device

Lid has safety device, which cuts off the

gas supply for the hob. It works only

when the lid is closed.

WARNING!

Always use the knob for the

hob to switch off a burner.

Do not use the lid as a cut-

off device.

6. HOB - HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Cookware

WARNING!

Do not put the same pan on

two burners.

WARNING!

Do not put unstable or

damaged pots on the burner

to prevent from spill and

injury.

CAUTION!

Make sure that pot handles

are not above the front edge

of the cooktop.

CAUTION!

Make sure that the pots are

placed centrally on the

burner in order to get

maximum stability and to

get lower gas consumption.

6.2 Diameters of cookware

WARNING!

Use cookware with

diameters applicable to the

size of burners.

Burner Diameter of cook-

ware (mm)

Triple Crown 220 - 260

Semi-rapid 120 - 220

Auxiliary 80 - 160

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments