AEG KE8404021M User Manual download pdf (Page 15)

the meat is at the set temperature, the

appliance deactivates.

CAUTION!

Only use the core

temperature sensor supplied

or the correct replacement

parts.

The core temperature sensor

must stay in the meat and in

the socket during the

cooking.

1. Activate the appliance.

2. Put the tip of the core temperature

sensor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket at the front of

the appliance.

The display shows the core temperature

sensor symbol.

4. Press or in less than 5

seconds to set the core temperature.

5. Set the heating function and, if

necessary, the oven temperature.

The appliance calculates an approximate

end time. The end time is different for

the different quantities of the food, the

set oven temperatures (minimum 120 °C)

and the operating modes. The appliance

calculates the end time in approximately

30 minutes.

6. To change the core temperature,

press

.

When the meat is at the set core

temperature, an acoustic signal sounds.

The appliance deactivates automatically.

7. Touch a sensor field to stop the

signal.

8. Remove the core temperature sensor

plug from the socket and remove the

meat from the oven.

WARNING!

The core temperature sensor

is hot. There is a risk of

burns. Be careful when you

remove the tip and the plug

of the core temperature

sensor.

9.2 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

Deep pan:

Push the deep pan between the guide

bars of the shelf support.

Wire shelf and the deep pan together:

ENGLISH

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comments to this Manuals

No comments