AEG A92860GNX1 User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
Problem Possible cause Solution
Upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible).
The compressor runs
continuously.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessa-
ry.
The food temperature is
too warm.
Let the food temperature
decrease to room temper-
ature before storage.
The room temperature is
too warm.
Decrease the room tem-
perature.
There is too much
frost and ice.
The door is not closed
correctly.
Refer to "Closing the
door".
The door gasket is de-
formed or dirty.
Refer to "Closing the
door".
The temperature in
the appliance is too
cold.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The temperature in
the appliance is too
warm.
The Temperature regula-
tor may be set incorrectly.
Set a colder temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The food temperature is
too warm.
Let the food temperature
decrease to room temper-
ature before storage.
The temperature in
the freezer is too
warm.
Food is too near to each
other.
Store food so that there is
cold air circulation.
Large quantities of food
to be frozen were put in
at the same time.
Insert smaller quantities of
food to be frozen at the
same time.
The appliance does
not operate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not
connected to the mains
socket correctly.
Connect the mains plug to
the mains socket correctly.
14
www.aeg.com
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments