AEG NM 1600 Installation Manual download pdf (Page 26)

Parameter Specification

Temperature -25°C - +60°C (>45°C derating)

Environmental class according to IEC IEC60721-3-3

3K6/3B3/3S3/3M2

Air quality ISA S71.04-1985

Level G2 (at 75%RH)

Coastal, heavy industrial and farmer areas Must be measured and classified acc. to ISA S71.04-1985

Vibration 1G

Ingress protection class 54

Max. operating altitude 3000m above sea level.

PELV protection is effective up to 2000m above sea level only.

Installation Avoid constant stream of water.

Avoid direct sunlight.

Ensure adequate air flow.

Mount on non-flammable surface.

Mount upright on vertical surface.

Prevent dust and ammonia gases.

Table 5.3: Conditions for Installation

Parameter Condition Specification

Wall Plate Hole diameter 30 x 9 mm

Alignment Perpendicular ± 5° all angles

Table 5.4: Wall Plate Specifications

5.1.1. Cable Requirements

Cable Condition Specification

AC 5 wire cable Copper

Outer diameter 18-25 mm

Insulation strip All 5 wires 16 mm

Max. recommended cable length

Protect PV 10

2.5 mm

21 m

4 mm

34 m

6 mm

52 m

10 mm

87 m

Max. recommended cable length

Protect PV 12.5

4 mm

28 m

6 mm

41 m

10 mm

69 m

Max. recommended cable length

Protect PV 15

6 mm

34 m

10 mm

59 m

PE Cable diameter at least as phase cables

DC Max. 1000 V, 12 A

Cable length

4 mm

- 4.8 Ω /km

< 200 m*

Cable length

6 mm

- 3.4 Ω /km

>200-300 m*

Mating connector Multi-contact PV-ADSP4./PV-ADBP4.

* The distance between inverter and PV array and back, plus the summarised length of the cables used for

PV array installation.

Table 5.5: Cable Requirements

Note:

Avoid power loss in cables of more than 1 % of nominal inverter rating.

Note:

In France, observe the UTE C 15-712-1 and NF C 15-100 requirements.

5. Technical Data

8000038781_00_BAL_en / L00410564-01_02 25

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

AEG NM 1600 Installation Manual Page 26

Comments to this Manuals

Related products and manuals for Sewing machines AEG NM 1600