AEG NM 1600 Installation Manual download pdf (Page 19)

4. Start-up and Check of Settings

4.1. Start-up and Check of Settings

Note:

Due to the advanced functionalities of the inverter, it may take up to 10 seconds before the

display becomes available after power up.

Note:

For the version the first start-up and check of settings can also be performed via the integra-

ted Web Server. For further details, refer to the Web Server User Manual.

The inverter is shipped with a predefined set of settings for different countries. All country spe-

cific limits are stored in the inverter and must be selected at installation. It is always possible to

see the applied country limits in the display. The inverter accounts for daylight saving automati-

cally.

After installation, check all cables and then close the inverter.

Turn on AC at the mains switch.

When prompted by the display select language. This selection has no influence on the operating

parameters of the inverter and is not a country selection.

Illustration 4.1: Select Language

The language is set to English at initial start-

up. To change this setting press the OK but-

ton. Press ‘

▼

’ to scroll down through the

languages. Select language by pressing ‘OK’.

Note:

To use the default language (English) simply press the 'OK' button twice to select and ac-

cept.

4. Start-up and Check of Settings

18 8000038781_00_BAL_en / L00410564-01_02

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

No comments

AEG NM 1600 Installation Manual Page 19