AEG BD540P User Manual download pdf (Page 13)

Appliance turns on automatically later

on, works for the set DURATION time

and stops at the set END time. At the set

time an acoustic signal sounds for 2

minutes. and time setting flash in the

display. The appliance deactivates.

7. Press any button to stop the acoustic

signal.

8. Turn the knob for the oven functions

to the off position.

6.6 Setting the MINUTE

MINDER

1. Press .

and "00" flash in the display.

2. Press

or to set the MINUTE

MINDER.

First you set the seconds, then the

minutes.

When the time you set is longer than

60 minutes, flash in the display.

3. Set the hours.

4. The MINUTE MINDER starts

automatically after 5 seconds.

After 90% of the set time, an acoustic

signal sounds.

5. When the set time ends, an acoustic

signal sounds for 2 minutes. "00:00"

and

flash in the display. Press any

button to stop the acoustic signal.

6.7 COUNT UP TIMER

To reset the Count Up Timer, press and

hold and . The timer starts to count

up again.

7. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

7.1 Core temperature sensor

The core temperature sensor measures

temperature inside the food. When the

food is at the set temperature, the

appliance deactivates.

There are two temperatures to be set:

• the oven temperature (minimum 120

°C),

• the food core temperature.

CAUTION!

Use only the core

temperature sensor supplied

and the original replacement

parts.

Directions for the best results:

• Ingredients should be at room

temperature.

• Core temperature sensor cannot be

used for liquid dishes.

• During cooking the core temperature

sensor must remain in the dish and

the plug in the socket.

• Use recommended food core

temperature settings. Refer to "Hints

and tips" chapter.

Every time you put the core

temperature sensor in the

socket, you need to set the

core temperature time

again. You cannot select the

duration and end time.

The appliance calculates the

approximate cooking time, it

may change.

Food categories: meat, poultry

and fish

1. Set the oven function and

temperature.

2. Insert the tip of the core temperature

sensor into the centre of meat or fish,

in the thickest part if possible. Make

sure that at least 3/4 of the core

temperature sensor is inside of the

dish.

3. Put the plug of the core temperature

sensor into the socket located in the

front frame of the appliance.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments