AEG BSE792320M User Manual download pdf (Page 10)

Symbol Function

Weight Automatic The display shows that the automatic

weight system is active or that weight

can be changed.

Heat + Hold The function is active.

5. BEFORE FIRST USE

WARNING!

Refer to Safety chapters.

5.1 Initial Cleaning

Remove all accessories and removable

shelf supports from the oven.

Refer to "Care and

cleaning" chapter.

Clean the oven and the accessories

before first use.

Put the accessories and the removable

shelf supports back to their initial

position.

5.2 First Connection

When you connect the appliance to the

mains or after the power cut, you have to

set the language, the display contrast,

the display brightness and the time of

the day.

1. Press or to set the value.

2. Press

to confirm.

5.3 Setting the hardness level

for the water

When you connect the appliance to the

mains, you have to set the water

hardness level.

The table below explains the water

hardness range with the corresponding

Calcium deposit (mmol/l) and the quality

of the water.

Water hardness Calcium deposit

(mmol/l)

Calcium deposit

(mg/l)

Water classi-

fication

Class dH

1 0 - 7 0 - 1.3 0 - 50 Soft

2 7 - 14 1.3 - 2.5 50 - 100 Moderately

hard

3 14 - 21 2.5 - 3.8 100 - 150 Hard

4 over 21 over 3.8 over 150 Very hard

When the water hardness exceeds the

values in the table, fill the water drawer

with bottled water.

1. Take the four colour change strip

supplied with the steam set in the

oven.

2. Put all the reaction zones of the strip

into the water for approximately 1

second.

Do not put the strip into the running

water!

3. Shake the strip to remove the excess

of the water.

www.aeg.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Comments to this Manuals

No comments