AEG GS60AIB User Manual download pdf (Page 18)

Problem and alarm code Possible cause and solution

The appliance does not fill

with water.

The display shows .

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not

drain the water.

The display shows .

• Make sure that the sink spigot is not clogged.

• Make sure that the filter in the outlet hose is not clog-

ged.

• Make sure that the interior filter system is not clogged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.

The display shows .

• Close the water tap and contact an Authorised Service

Centre.

The appliance stops and

starts more times during op-

eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

The program lasts too long. • Select the time-saving option to shorten the program

time (if applicable).

• If the delayed start option is set, cancel the delay setting

or wait for the end of the countdown.

The remaining time in the

display increases and skips

nearly to the end of program

time.

• This is not a defect. The appliance is working correctly.

Small leak from the appli-

ance door.

• The appliance is not level. Loosen or tighten the adjust-

able feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

The appliance door is diffi-

cult to close.

• The appliance is not level. Loosen or tighten the adjust-

able feet (if applicable).

• Parts of the tableware are protruding from the baskets.

Rattling/knocking sounds

from inside the appliance.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

The appliance trips the cir-

cuit-beaker.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

www.aeg.com18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Comments to this Manuals

No comments

AEG GS60AIB User Manual Page 18

Comments to this Manuals

Related products and manuals for Dishwashers AEG GS60AIB