AEG FEB31600ZM User Manual download pdf (Page 55)

Problem and alarm code Possible cause and solution

The appliance does not fill with water.

• The end indicator flashes 1 time in-

termittently.

• The Start indicator flashes continu-

ously.

• Make sure that the water tap is open.

• Make sure that the pressure of the water sup-

ply is not too low. For this information, contact

your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not

clogged.

• Make sure that the inlet hose has no kinks or

bends.

The appliance does not drain the wa-

ter.

• The end indicator flashes 2 times

intermittently.

• The Start indicator flashes continu-

ously.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or

bends.

The anti-flood device is on.

• The end indicator flashes 3 times

intermittently.

• The Start indicator flashes continu-

ously.

• Close the water tap and contact an Authorised

Service Centre.

The appliance stops and starts more

times during operation.

• It is normal. It provides optimal cleaning re-

sults and energy savings.

The program lasts too long. • If the delayed start option is set, cancel the de-

lay setting or wait for the end of the count-

down.

Small leak from the appliance door. • The appliance is not levelled. Loosen or tight-

en the adjustable feet (if applicable).

• The appliance door is not centred on the tub.

Adjust the rear foot (if applicable).

The appliance door is difficult to

close.

• The appliance is not levelled. Loosen or tight-

en the adjustable feet (if applicable).

• Parts of the tableware are protruding from the

baskets.

Rattling/knocking sounds from inside

the appliance.

• The tableware is not properly arranged in the

baskets. Refer to basket loading leaflet.

• Make sure that the spray arms can rotate free-

ly.

The appliance trips the circuit-beaker. • The amperage is insufficient to supply simulta-

neously all the appliances in use. Check the

socket amperage and the capacity of the me-

ter or turn off one of the appliances in use.

• Internal electrical fault of the appliance. Con-

tact an Authorised Service Centre.

ENGLISH 55

1 ... 54 55 56 57 58 59 60

Comments to this Manuals

No comments

AEG FEB31600ZM User Manual Page 55

Comments to this Manuals

Related products and manuals for Dishwashers AEG FEB31600ZM