AEG F34030VI0 User Manual

FAVORIT 34030 VIENDISHWASHER USER MANUAL

– The audible signals are deactivated.6. Switch of the appliance to confirm the operation.Do these steps to activate again the audible signals:1. Foll

Water hardnessWater hardness ad-justmentGerman degrees(°dH)French degrees(TH°)mmol/l Clarke de-greesmanually elec-tronical-ly19 - 22 33 - 39 3,3 - 3,9

USE OF DISHWASHER SALTHow to fill the salt container1. Turn the cap counterclockwise and openthe salt container.2. Fill the salt container with 1 litr

5. Close the detergent dispenser. Press the lid until it locks into position.Different brands of detergent dissolve in different times. Some detergent

• Remove the remaining food from the items.• Make soft the remaining burned food on the items.• Put hollow items (cups, glasses and pans) with the ope

Put the knives with the handles up.Mix the spoons with other cutlery to prevent themto bond together.Use the cutlery grid. If the dimensions of the cu

Maximum height of the dishes in: the upper basket the lower basketHigher position 20 cm 31 cmLower position 24 cm 27 cmDo these steps to move the upp

Consumption valuesProgramme Programme time (mi-nute)Energy (kWh) Water (litre)120 - 130 1,8 - 2,0 22 - 24100 - 110 1,4 - 1,6 19 - 21130 - 140 1,0 - 1,

How to cancel a washing programme or a delay startIf a washing programme or a delay start has not started, you can change the selection.When a washing

• Flat filter (C).1. To unlock the filters (A) and (B), turn thehandle on the microfilter (B) approxi-mately 1/4 counterclockwise and remove.2. Hold t

FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn

WHAT TO DO IF…The appliance does not start or stops during operation.First try to find a solution to the problem (refer to the chart). If not, contact

Malfunction Fault code Possible cause Possible solution The mains plug is notconnected in.Put in the mains plug. Blow out fuse in thehousehold f

Problem Possible cause Possible solutionThere are streaks, milky stains,or a bluish layer on glasses anddishes.Rinse aid dosage is too high. Decrease

WARNING!To discard the appliance, follow the procedure:• Pull the mains plug out of the socket.• Cut off the mains cable and mains plug and discard th

www.aeg.com/shop 156982593-A-232011

CONTENTS4 Safety information7 Product description8 Control panel10 Use of the appliance10 Setting the water softener12 Use of dishwasher salt12 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Fill the appliance with salt before you start a washing programme. Remaining salt in theappliance can cause corrosion or make a hole in the bottom o

• Make sure not to squash or cause damage to the water hoses when you install the appli-ance.• Make sure that the water couplings are tight to prevent

To discard the appliance• To prevent the risk of injury or damage:– Disconnect the mains plug from the mains socket.– Cut off the mains cable and disc

6 Rating plate7 Filters8 Lower spray arm9 Upper spray armCONTROL PANEL21345BA1 On/off button2 Programme indicator lights3 Indicator lights4 Programme

• To set the water softener. Refer to the chapter 'Setting the water softener'.• To deactivate/activate the audible signals. Refer to the se