Aeg FAVORIT 60860 User Manual download pdf (Page 21)

Using 3in1 detergents

These products are detergents with a combined cleaning, rinsing and

salt function.

When the 3in1 function is activated,

– the addition of special salt and rinse aid from the respective dispenser

is prevented.

– If the salt and rinse aid dispensers are empty, this is not indicated.

3 If you want to use 3in1 detergents, check whether these detergents are

suitable for your water hardness. (Follow the manufacturer’s instruc-

tions.)

If you want to use 3in1 products

1. Press the ON/OFF button.

2. Press the 3IN1 button.

The button indicator lights up: 3in1 function is selected.

Before the start of the dishwashing cycle put 3in1 detergent in the de-

tergent dispenser.

3 As the rinse aid inflow is automatically switched off when the 3in1

function is activated, it may come about because of the different qual-

ity standards in the 3in1 detergent, that the dishes do not dry suffi-

ciently.

If this happens, proceed as follows (see section “Adding rinse aid”):

• Fill up the dispenser (if this is empty) with rinse aid.

• Set rinse aid dosage to “2” mechanically.

• Activate rinse aid inflow.

If you do not want to use 3in1 products any more

If you want to stop using 3in1 products, please do the following:

• Deactivate the 3in1 function.

• Fill up the dispensers for salt and rinse aid again.

• Switch the water softener to the highest setting and perform up to

three normal cycles without loading any dishes.

• Then set the water softener to the water hardness in your area.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

Aeg FAVORIT 60860 User Manual Page 21