AEG FAV2WBVI1P User Manual download pdf (Page 11)

6.6 How to set the colour of

the TimeBeam

The appliance must be in programme

selection mode.

It is possible to change the colour of the

TimeBeam to match the colour of the

kitchen floor. There are several colours

available. The TimeBeam can also be

deactivated.

1. To enter the user mode, press and

hold simultaneously and until

the indicators

, , , and

start to flash and the display is blank.

2. Press .

• The indicators , , and

go off.

• The indicator

continues to

flash.

• The display shows a number and

the letter C. Each number refers

to a different colour.

– = TimeBeam

deactivated.

3. Press again and again to change

the colour.

• You can see the different colours

on the kitchen floor.

4. Press the on/off button to confirm

the setting.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you have selected non

compatible options, the

appliance will automatically

deactivate one or more of

them. Only the indicators of

the options still active will

stay on.

7.1 Multitab

Activate this option when you use multi-

tablets that integrate the salt, rinse aid

and detergent functions. They can also

contain other cleaning or rinsing agents.

This option deactivates the release of

salt. The salt indicator does not come on.

This option also deactivates the release

of rinse aid but only when the rinse aid

dispenser is deactivated, (rinse aid

indicator does not come on). If the rinse

aid dispenser is activated, rinse aid is

released even with the option Multitab

activated.

With the use of this option the

programme duration is prolonged to

increase the cleaning and drying results

with the use of multi-tablets.

Multitab is not a permanent option and

must be selected at every cycle.

How to activate Multitab

Press .

The related indicator comes on.

7.2 TimeSaver

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

The total programme duration decreases

by approximately 50%.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

How to activate TimeSaver

Press , the related indicator comes on.

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments