AEG FAV2WBVI1P User Manual download pdf (Page 10)

• The indicators , , and

go off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g. = level 4.

– The levels of rinse aid are

from 0A to 6A.

– Level 0 = no rinse aid is

released.

3. Press again and again to change

the setting.

4. Press the on/off button to confirm

the setting.

6.4 Use of rinse aid and multi-

tablets

The factory setting of the rinse aid

dispenser is with the dispenser activated.

This means that the rinse aid dispenser

always releases rinse aid.

It is possible to deactivate the rinse aid

dispenser, in this case the dispenser will

not release rinse aid only if the option

Multitab is activated.

If the dispenser is deactivated and you

do not select the option Multitab, the

dispenser will release rinse aid.

The use of the option Multitab with the

rinse aid dispenser deactivated may not

give satisfying drying results.

When the rinse aid dispenser is

deactivated, the rinse aid indicator is

always off when the option Multitab is

activated.

How to deactivate the rinse

aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators , , , and

start to flash and the display is blank.

2. Press

.

• The indicators

, , and

go off.

• The indicator continues to

flash.

• The display shows the current

setting: = the rinse aid

dispenser is activated (factory

setting).

3. Press to change the setting.

= the rinse aid dispenser is

deactivated.

4. Press the on/off button to confirm

the setting.

6.5 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.

1. To enter the user mode press and

hold simultaneously and until

the indicators , , , and

start to flash and the display is blank.

2. Press

• The indicators , , and

go off.

• The indicator continues to

flash.

• The display shows the current

setting:

= Acoustic signal off.

3. Press

to change the setting.

= Acoustic signal on.

4. Press the on/off button to confirm

the setting.

www.aeg.com

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments