AEG F66702IM0P User Manual

Browse online or download User Manual for Dishwashers AEG F66702IM0P. Aeg F66702IM0P User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - FAVORIT 66702 IM0P

EN User ManualDishwasherFAVORIT 66702 IM0P

Page 2 - CUSTOMER CARE AND SERVICE

How to set the water softenerlevelThe appliance must be in programmeselection mode.1. To enter the user mode, press andhold simultaneously Delay and O

Page 3 - General Safety

7. OPTIONSDesired options must beactivated every time beforeyou start a programme.It is not possible to activateor deactivate options while aprogramme

Page 4 - 2. SAFETY INSTRUCTIONS

inside the appliance. Do not usedetergent and do not load thebaskets.When you start a programme, theappliance can take up to 5 minutes torecharge the

Page 5 - 3. PRODUCT DESCRIPTION

9. DAILY USE1. Open the water tap.2. Press the on/off button to activatethe appliance.Make sure that the appliance is inprogramme selection mode.• If

Page 6 - 4. CONTROL PANEL

Opening the door while theappliance operatesIf you open the door while a programmeis running, the appliance stops. It mayaffect the energy consumption

Page 7 - 5. PROGRAMMES

• Do not use more than the correctquantity of detergent. Refer to theinstructions on the detergentpackaging.10.3 What to do if you want tostop using m

Page 8 - 6. SETTINGS

11.1 Cleaning the filtersThe filter system is made of 3 parts.CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of

Page 9 - 6.2 The water softener

11.2 Cleaning the upper sprayarmWe recommend to clean regularly theupper spray arm to avoid soil to clog theholes.Clogged holes can cause unsatisfacto

Page 10

With some problems, the displayshows an alarm code.The majority of problems that canoccur can be solved without the needto contact an Authorised Servi

Page 11 - BEFORE FIRST USE

Problem and alarm code Possible cause and solutionSmall leak from the appli-ance door.• The appliance is not level. Loosen or tighten the adjust-able

Page 12 - 8.2 How to fill the rinse aid

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

Page 13 - 9. DAILY USE

Problem Possible cause and solutionThere are stains and dry waterdrops on glasses and dishes.• The released quantity of rinse aid is not sufficient. A

Page 14 - 10. HINTS AND TIPS

13. TECHNICAL INFORMATIONDimensions Width / height / depth (mm) 596 / 818 - 898 / 575Electrical connection 1)Voltage (V) 200 - 240Frequency (Hz) 50 /

Page 17 - TROUBLESHOOTING

www.aeg.com/shop117905513-A-142015

Page 18

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

Page 19 - ENGLISH 19

• Put knives and cutlery with sharp points in the cutlerybasket with the points down or in a horizontalposition.• Do not keep the appliance door open

Page 20

WARNING!Dangerous voltage.• If the water inlet hose is damaged,immediately disconnect the mainsplug from the mains socket. Contactthe Authorised Servi

Page 21 - 14. ENVIRONMENT CONCERNS

5Rating plate6Salt container7Air vent8Rinse aid dispenser9Detergent dispenser10Lower basket11Upper basket12Cutlery drawer4. CONTROL PANEL12 4683751On/

Page 22

Indicator DescriptionSalt indicator. It is always off while the programme operates.Rinse aid indicator. It is always off while the programme operates.

Page 23 - ENGLISH 23

Programme Degree of soilType of loadProgramme phases Options 5)• Normal soil• Crockery and cut-lery• Prewash• Wash 50 °C• Rinses• Dry• XtraDry1) With

Page 24 - 117905513-A-142015

• The level of rinse aid according to therequired dosage.These settings will be saved until youchange them again.How to set the programmeselection mod

Comments to this Manuals

No comments