AEG F34300VI0 User Manual

EN User ManualDishwasherF34300VI0

7.1 The salt containerCAUTION!Only use salt specificallydesigned for dishwashers.The salt is used to recharge the resin inthe water softener and to as

Make sure that the appliance is inprogramme selection mode.• If the salt indicator is on, fill thesalt container.• If the rinse aid indicator is on, f

Cancelling the programmePress and hold the programme buttonuntil the appliance is in programmeselection mode.Make sure that there is detergent in thed

9.3 What to do if you want tostop using multi-tabletsBefore you start to use separatelydetergent, salt and rinse aid do thefollowing procedure.1. Set

CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.

10.2 Cleaning the spray armsDo not remove the spray arms. If theholes in the spray arms are clogged,remove remaining parts of soil with a thinpointed

Problem and alarm code Possible cause and solutionThe appliance does not fill with water.• The end indicator flashes 1 time in-termittently.• Acoustic

Refer to "Before first use", "Daily use", or "Hints andtips" for other possiblecauses.Once you have checked the applianc

Problem Possible cause and solutionTraces of rust on cutlery. • There is too much salt in the water used for washing.Refer to "The water softener

13. ENVIRONMENT CONCERNSRecycle the materials with the symbol .Put the packaging in applicablecontainers to recycle it. Help protect theenvironment a

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

www.aeg.com/shop100014390-A-322015

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

• Put knives and cutlery with sharp points in the cutlerybasket with the points down or in a horizontalposition.• Do not keep the appliance door open

AB• The water inlet hose has an externaltransparent sheath. If the hose isdamaged, the water in the hosebecomes dark.• If the water inlet hose is dama

3. PRODUCT DESCRIPTION437 9 8 105611 121Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Det

4.1 IndicatorsIndicator DescriptionRunning programme indicator. It comes on when the programme startsand goes off when the programme is completed.End

6. SETTINGS6.1 Programme selectionmode and user modeWhen the appliance is in programmeselection mode it is possible to set aprogramme and to enter the

than 21°dH, you can set the lowest watersoftener level. It deactivates the salt refillindicator.If you use standard detergent or multi-tablets without