AEG F34030VI0 User Manual download pdf (Page 7)

5. OPTIONS

5.1 Acoustic signals

The acoustic signals operate in these

conditions:

• When the programme is completed.

• A malfunction occurs to the appliance.

Factory setting: on.

You can deactivate the acoustic

signals.

Deactivating the acoustic signals

1. Press the on/off button to activate

the appliance.

2. Make sure that the appliance is in

setting mode. Refer to ‘SETTING

AND STARTING A PROGRAMME’.

3. Press and hold the programme but-

ton until the programme indicator (A)

flashes and the programme indicator

(B) comes on.

4. Press immediately the programme

button.

• The programme indicator (A)

comes on with a fixed light.

• The programme indicator (B) starts

to flash.

5. Wait until the programme indicator

(A) goes off and the end indicator

comes on (the programme indicator

(B) continues to flash).

• The acoustic signals are on.

6. Press the programme button. The

end indicator goes off.

• The acoustic signals are off.

7. Deactivate the appliance to confirm

the setting.

Activating the acoustic signals

1. Refer to ‘Deactivating the acoustic

signals’, step (1) through (4).

2. Wait until the programme indicator

(A) goes off. The end indicator is off

and programme indicator (B) contin-

ues to flash.

• The acoustic signals are off.

3. Press the programme button. The

end indicator comes on.

• The acoustic signals are on.

4. Deactivate the appliance to confirm

the setting.

6. BEFORE FIRST USE

1. Make sure that the set level of the

water softener agrees with the water

hardness in your area. If not, adjust

the water softener. Contact your local

water authority to know the water

hardness in your area.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the

appliance. Start a programme to re-

move them. Do not use detergent

and do not load the baskets.

6.1 Adjusting the water

softener

Hard water contains a high quantity of

minerals that can cause damage to the

appliance and bad washing results. The

water softener neutralises these miner-

als.

The dishwasher salt keeps the water

softener clean and in good conditions.

Refer to the table to adjust the water

softener to the right level. It makes sure

that the water softener uses the correct

quantity of dishwasher salt and water.

You must adjust the water soft-

ener manually and electronically.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments