AEG F34030VI0 User Manual download pdf (Page 14)

Alarm code Problem

• The indicator of the set programme

flashes continuously.

• The end indicator flashes 1 time in-

termittently.

The appliance does not fill with water.

• The indicator of the set programme

flashes continuously.

• The end indicator flashes 2 times in-

termittently.

The appliance does not drain the wa-

ter.

• The indicator of the set programme

flashes continuously.

• The end indicator flashes 3 times in-

termittently.

The anti-flood device is on.

WARNING!

Deactivate the appliance before

you do the checks.

Problem Possible cause Possible solution

The programme

does not start.

The mains plug is not con-

nected in the mains socket.

Connect the mains plug.

The appliance door is

open.

Close the appliance door.

The fuse in the fuse box is

damaged.

Replace the fuse.

The delay start is set. Cancel the delay start or

wait for the end of the

countdown.

The appliance does

not fill with water.

The water tap is closed. Open the water tap.

The water pressure is too

low.

Contact your local water

authority.

The water tap is clogged or

there is limescale on it.

Clean the water tap.

The filter in the water inlet

hose is clogged.

Clean the filter.

The water inlet hose has a

kink or a bend.

Make sure that the position

of the hose is correct.

The anti-flood device is on.

There are water leakages in

the appliance.

Close the water tap and

contact the Service.

The appliance does

not drain the water.

The sink spigot is clogged. Clean the sink spigot.

The water drain hose has a

kink or a bend.

Make sure that the position

of the hose is correct.

14

www.aeg.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments