AEG F34030VI0 User Manual download pdf (Page 11)

A

B

D

30

20

C

M

A

X

1

2

3

4

+

-

B

2

0

0

3

A D

C

CAUTION!

Use only detergents for dish-

washers.

1.

Press the release button (B) to open

the lid (C).

2.

Put the detergent in the compart-

ment (A) .

3.

If the programme has a prewash

phase, put a small quantity of deter-

gent in the compartment (D).

4.

If you use detergent tablets, put the

tablet in the compartment (A).

5.

Close the lid. Make sure that the re-

lease button locks into position.

7.3 Combi detergent tablets

These tablets contain detergent, rinse

aid and other added agents. Be sure

that these tablets are applicable to the

water hardness in your area. Refer to the

instructions on the packaging of the

products.

When you use tablets, that contain salt

and rinse aid, do not fill the salt contain-

er and the rinse aid dispenser. The rinse

aid indicator always comes on if the rinse

aid dispenser is empty.

1. Adjust the water softener to the low-

est level.

2. Set the rinse aid dispenser to the

lowest position.

If you stop to use the combi

detergent tablets, before you

start to use separately

detergent, rinse aid and

dishwasher salt, do these

steps:

1. Press the on/off button to activate

the appliance.

2. Set the water softener to the highest

level.

3. Make sure that the salt container and

the rinse aid dispenser are full.

4. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

5. Adjust the water softener to the wa-

ter hardness in your area.

6. Adjust the released quantity of rinse

aid.

7.4 Setting and starting a

programme

Setting mode

The appliance must be in setting mode

to accept some operations.

The appliance is in setting mode when,

after the activation, all the programme

indicators are off and the end indicator

flashes.

If the control panel shows other condi-

tions, press and hold the programme

button until the appliance is in setting

mode.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments