AEG L87695WD User Manual download pdf (Page 6)

• Make sure not to cause damage to the

mains plug and cable.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• Only for UK and Ireland. The appliance

has a 13 amp mains plug. If it is neces-

sary to change the fuse in the mains

plug, use a 13 amp ASTA (BS 1362)

fuse.

• Permanent connection. To connect

the appliance permanently, install a

double-pole isolating switch between

the appliance and the electricity supply.

It must have a minimum distance of 3

mm between the switch contacts and it

must be the correct type for the neces-

sary load. It must agree with the last

electrical legislation. The switch must

not break the yellow and green ground

cable.

Only a qualified electrician must install

this type of device.

DISPOSAL

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent chil-

dren and pets to get closed in the ap-

pliance.

IN THE INTEREST OF THE ENVIRONMENT

• Connect the appliance to the FOUL sys-

tem for the drain water. The sewage

works keeps the drain water for the

treatment before to release safely it in-

to a river. Do not connect this appliance

to the surface drain system of the water

because it releases the drain water di-

rectly into a river or stream without a

treatment and this can cause of pollu-

tion. Contact your local water authority

to have more information.

6

www.aeg.com

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comments to this Manuals

No comments