AEG L7WEC166R User Manual download pdf (Page 31)

The display also shows the remaining

programme time.

11.4 At the end of the drying

programme

• The appliance stops automatically.

• The acoustic signals operate (if they

are active).

• In the display comes on.

• The indicator of button Start/Pause

goes off. The door locked

goes

off

• Press the button On/Off for some

seconds to deactivate the appliance.

After some minutes from

the end of the

programme, the energy

saving function

deactivates the appliance

automatically.

1. Remove the laundry from the

appliance.

2. Make sure that the drum is empty.

After drying phase, clean the

drum, the seal and the inside

of the door with a wet cloth.

12. DAILY USE - DRYING ONLY

WARNING!

Refer to Safety chapters.

This appliance is an

automatic washer dryer.

12.1 Preparation to drying

1. Press the On/Off button for some

seconds to activate the appliance.

With a drying-only

programme the display does

not show the laundry weight

and the PROSENSE

estimation is deactivated.

2. Load the laundry one item at a time.

3. Turn the programme dial to the

programme suitable for the items to

dry.

4. Tap on the Mode button twice to

exclude washing and perform drying

only. The Dry indicator is on. The

indicators and appear on

the display.

When drying a big amount

of laundry, to have good

drying performances, make

sure that the laundry itself is

not rolled up and that is

uniformly distributed in the

drum.

12.2 Drying - Automatic levels

1. Tap on the Auto Drying button

repeatedly until the display shows

the required dryness level. The

indicators in the display illuminate

accordingly:

a. Iron dry: for cotton

items;

b. Cupboard dry: for

cotton and synthetic items;

c.

Extra dry: for cotton

items.

The display shows the drying

programme duration.

To have a good drying by

using less energy and in a

shorter time, the appliance

does not let you set a too

low spin speed for the items

to be washed and dried.

2. Touch button Start/Pause to start the

programme.

In the display the door locked

indicator goes on, the indicator of the

running phase starts flashing.

The display also shows the remaining

programme time.

12.3 Timed Drying

1. Tap on the button Time Drying

repeatedly to set the desired time

ENGLISH

31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comments to this Manuals

No comments