AEG L7WEC166R User Manual download pdf (Page 30)

1. After loading laundry and detergent,

press the On/Off button for some

seconds to activate the appliance.

2. Set the Non Stop 60minprogramme

by means of the programme dial.

The indicator appears on the display

3. Touch the Start/Pause button to start

the programme.

Non-automatic wash&dry

programmes

In some washing programmes, you can

combine Wash and Dry mode for

running a complete wash&dry

programme.

Proceed as follows:

1. Press the On/Off button for some

seconds to activate the appliance.

2. Turn the programme dial to the

desired washing programme. The

display shows the default

temperature and spin. If necessary,

change them according to your

laundry. The display also shows the

maximum recommended load for

washing phase.

3. Set the desired options, if there are

available.

4. Touch the Mode button once to

activate also the drying function. The

Wash and Dry indicators come on.

The indicators

and

appear on the display. The display

also shows the maximum

recommended load for a washing

and drying programme (e.g. 6 kg for

cottons).

5. Open the door and load the laundry

one item at a time. On the display

the weight of the laundry is updated

by steps of kg 0.5 and the

programme duration is updated

accordingly.

6. Close the door.

7. Put the detergent and the additives

in the appropriate compartment.

When drying a large laundry

load, make sure that the

garments are not rolled up

and that are uniformly

distributed in the drum.

11.2 Washing and Drying -

Automatic levels

1. Tap on the Auto Drying button

repeatedly until the display shows

the required dryness level. The

indicators in the display illuminate

accordingly:

a. Iron dry: for cotton

items;

b. Cupboard dry: for

cotton and synthetic items;

c.

Extra dry: for cotton

items.

The time value on the display is the

duration of both cycles washing and

drying.

To have a good drying by

using less energy and in a

shorter time, the appliance

does not let you set a too

low spin speed for the items

to be washed and dried.

2. Touch button Start/Pause to start the

programme. The PROSENSE

estimation starts.

In the display the door locked

indicator goes on, the indicator of the

running phase starts flashing.

The display also shows the remaining

programme time.

11.3 Washing and Timed

Drying

1. Tap on the button Time Drying

repeatedly to set the desired time

value (see the "Timed drying" table

the "Programmes" chapter). The

drying level indicator goes off and

the indicator

comes on.

Each time you tap on this button the

time value increases by 5 minutes. The

display shows the set new time value.

2. Touch the Start/Pause to start the

programme. The PROSENSE

estimation starts.

In the display the door locked

indicator comes on and the indicator of

the running phase starts flashing.

www.aeg.com

30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Comments to this Manuals

No comments