AEG L76475FL User Manual download pdf (Page 17)

5.

Press button

4

to start the pro-

gramme. The indicator of button

4

is on.

The drain pump can operate for

a short time when the appliance

fills water.

The appliance adjust auto-

matically the cycle time to the

laundry you have put in the

drum to have perfect washing

results in the minimum neces-

sary time. After approximate-

ly 15 minutes from the start of

the programme, the display

shows the new time value.

9.4 Interrupt a programme

1.

Press button

4

. The indicator

flashes.

2.

Press button

4

again. The washing

programme continues.

9.5 Cancel a programme

1.

Press button

1

to cancel the pro-

gramme and to deactivate the appli-

ance.

2.

Press button

1

again to activate

the appliance. Now, you can set a

new washing programme.

The appliance does not drain the

water.

9.6 Change a function

You can change only some functions be-

fore they operate.

1.

Press button

4

. The indicator

flashes.

2.

Change the function set.

9.7 Set the delay start

1.

Press button

5

again and again un-

til the display shows the number of

minutes or hours. The related sym-

bols comes on.

2.

Press button

4

, the appliance

starts the countdown of the delay

start.

When the countdown is completed,

the programme starts automatically.

Before you press button

4

to

start the appliance, you can can-

cel or change the set of the delay

start.

9.8 Cancel the delay start

1.

Press button

4

. The related indica-

tor flashes.

2.

Press button

5

again and again un-

til the display shows 0’.

3.

Press button

4

. The programme

starts.

9.9 Open the door

While a programme or the delay start

operates, the appliance door is locked.

To open the appliance door:

1.

Press button

4

. The door lock

symbol in the display goes off.

2.

Open the appliance door.

3.

Close the appliance door and press

button

4

. The programme or the

delay start continues.

If the temperature and level of

the water in the drum are too

high, the door lock symbol stays

on and you cannot open the

door. To open the door do the

steps that follow:

1.

Deactivate the appliance.

2.

Wait for some minutes.

3.

Make sure that no water is in

the drum.

If you deactivate the appliance, it

is necessary to set the pro-

gramme again.

9.10 At the end of the

programme

• The appliance stops automatically.

• The acoustic signals operate.

•

In the display

comes on.

• The indicator of the Start/Pause but-

ton

4

goes off.

• The door lock symbol goes off.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Comments to this Manuals

No comments