AEG L61470BI User Manual download pdf (Page 8)

5.1 Display

The display shows the following informa-

tion:

Duration of the set programme

When you set a programme, the display shows the duration in

hours and minutes (for example 2.05).

The duration is calculated automatically on the maximum load

for each type of fabric.

After the programme has started, the time remaining is updated

every minute.

Alarm codes

In the event of operating problems, some alarm codes can be

displayed, for example

(see chapter «Troubleshooting»).

End of programme

When the programme has finished, the display shows a blinking

zero

The DOOR light B, the WASHING light A and the light of button

8 go out.

The door can be opened.

Incorrect option selection

If you set an option which is not compatible with the wash pro-

gramme, the display shows the message Err for some seconds.

The yellow pilot light of button 8 light starts blinking.

Delay Start

When you press the relevant button to set the delay (20 hours

max), it appears for some seconds, then the display shows the

duration of the set programme.

The delay time value decreases by one unit every hour. When

only 1 hour remains, the time decreases every minute.

Delay Start symbol

This symbol comes on when you set the delay time.

Child safety lock

This symbol comes on when you activate the child lock function.

www.aeg.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

No comments

AEG L61470BI User Manual Page 8