AEG SKS71200F0 User Manual download pdf (Page 8)

3.4 Positioning the sliding box

The sliding box can be placed at differ-

ent heights.

Do make these adjustments proceed as

follow:

1.

lift the shelf with the sliding box up-

wards and out of the holders in the

door

2.

remove the retaining bracket out of

the guide under the shelf

3.

Reverse the above operation to in-

sert the sliding box at a different

height.

4. HELPFUL HINTS AND TIPS

4.1 Hints for energy saving

• Do not open the door frequently or

leave it open longer than absolutely

necessary.

• If the ambient temperature is high and

the Temperature Regulator is set to

low temperature and the appliance is

fully loaded, the compressor may run

continuously, causing frost or ice on

the evaporator. If this happens, set the

Temperature Regulator toward warm-

er settings to allow automatic defrost-

ing and so a saving in electricity con-

sumption.

4.2 Hints for fresh food

refrigeration

To obtain the best performance:

• do not store warm food or evaporat-

ing liquids in the refrigerator

• do cover or wrap the food, particularly

if it has a strong flavour

• position food so that air can circulate

freely around it

4.3 Hints for refrigeration

Useful hints:

Meat (all types) : wrap in polythene bags

and place on the glass shelf above the

vegetable drawer.

For safety, store in this way only one or

two days at the most.

Cooked foods, cold dishes, etc..: these

should be covered and may be placed

on any shelf.

Fruit and vegetables: these should be

thoroughly cleaned and placed in the

special drawer(s) provided.

Butter and cheese: these should be

placed in special airtight containers or

wrapped in aluminium foil or polythene

bags to exclude as much air as possible.

Milk bottles: these should have a cap

and should be stored in the bottle rack

on the door.

Bananas, potatoes, onions and garlic, if

not packed, must not be kept in the re-

frigerator.

8

www.aeg.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments