AEG KM6100 User Manual download pdf (Page 30)

30

GB

Other functions

Cleaning and care

7. Attachment hub: The appliance

comes with a built in multipurpose

Attachment hub. Read and carefully

follow the instructions that comes

with each attachment for correct and

safe use.

Kindly see www.electrolux.com for

more information.

8. Adjusting the tool shaft:

The appliance is adjusted at the

factory so that the attachment

clears the bottom of the bowl. If the

attachment hits the bottom of the

bowl or is too far away from the sides,

you can adjust it correctly.

See 9 for further instructions.

Note: Make sure the attachment is

as close to the bottom of the bowl as

possible for best results.

9. Turn the Speed selector to “OFF”

and unplug the appliance. Move

the bowl support arms down. Use

a slotted point Head screwdriver

to adjust the screw. Turn counter

clockwise to raise the Attachment

shaft, turn clockwise to lower it. If

wrongly adjusted you may not be

able to lock the bowl when lifted.

1. Switch the appliance o, remove

the plug from the wall socket and

wait until the tools have stopped

completely.

Warning! Never immerse the

housing, plug, or cord in water or any

other uid.

3. The housing should only be cleaned

with a soft damp cloth, then dried

with a cloth.

Note: Do not use abrasive cleansers or

scouring pads to clean the surfaces of

your appliance.

2. The Wire whip, Meat grinder* and

Slicer/Shredder* should only be

washed by hand in warm soapy

water.

The bowl, Flat beater and Dough

hook are dishwasher-proof.

*depending on model

KM6xxx_Ultramix Professional_AEG.indd 30 2016-04-06 15:14:20

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments